Automatic feeding machine does not stop automatically cause

　　Automatic loading machine is a kind of automation equipment which is usually used to convey materials into machines or other equipments automatically. During its working process, automatic stop is a very important function to ensure the safety of the equipment and operators. If the automatic loading machine does not stop automatically after completing the loading task, this will not only affect the production efficiency, but also cause potential harm to the equipment and operators. In this article, we will analyse in detail the reasons why the automatic loading machine does not stop automatically and provide possible solutions.

　　First, the cause of the failure

　　1, sensor failure

　　Automatic feeding machine usually uses sensors to detect the amount or location of materials. If the sensor fails, it may not be able to correctly detect the material, resulting in the equipment can not automatically stop.

　　2、Control circuit problems

　　Automatic feeding machine control circuit is the core of its automatic stop function. If the control circuit fails, the equipment may not be able to receive the sensor signal, resulting in the inability to automatically stop.

　　3, power supply problems

　　The power supply of the automatic feeding machine is the basis of its operation. If there is a problem with the power supply, the equipment can not work properly, including the automatic stop function.

　　4, mechanical failure

　　The mechanical part of the automatic loading machine is the key to its normal operation. If the mechanical part of the failure, such as conveyor belt damage or stagnation, may lead to the equipment can not be automatically stopped.

　　Automatic feeding machine　　

　　Second, the solution

　　1、Check the sensor

　　Firstly, check whether the sensor is working properly. You can clean the sensor and check if it is damaged. If the sensor is faulty, it needs to be replaced or repaired.

　　2、Check the control circuit

　　Check whether the control circuit is working properly. You can check whether the circuit board and electronic components are damaged or burnt. If problems are found, they need to be replaced or repaired.

　　3、Check the power supply

　　Check whether the power supply of the automatic feeding machine is normal. You can check whether the power cord and power adapter are damaged. If problems are found, they need to be replaced or repaired.

　　4、Check the mechanical parts

　　Check whether the mechanical part of the automatic feeding machine is working properly. You can check whether the parts such as conveyor belt, bearings and gears are damaged. If problems are found, they need to be replaced or repaired.

　　In short, there may be a variety of reasons why the automatic feeding machine does not stop automatically, which need to be eliminated one by one. Firstly, check whether the sensor, control circuit and power supply work normally, and then check whether the mechanical parts work normally. If problems are found, they need to be repaired or replaced according to the above solutions. Meanwhile, in order to ensure the safety and stability of the equipment, it is recommended to disconnect the power supply and ask professional personnel to carry out maintenance.